ADTRAN 5000 Series Command Reference Manual page 256

Command Reference Guide
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000
and Total Access 900 Series units.
Command History
Release 1.1
Release 9.1
Release 11.1
Usage Examples
The following is a sample output from the show running-config command:
>enable
#show running-config
Building configuration...
!
no enable password
!
ip subnet-zero
ip classless
ip routing
!
event-history on
no logging forwarding
logging forwarding priority-level info
no logging email
!
ip policy-timeout tcp all-ports 600
ip policy-timeout udp all-ports 60
ip policy-timeout icmp 60
!
interface eth 0/1........
61200990L1-35E
Command was introduced.
Command was expanded to include HDLC and tunnel interfaces.
Demand, FXO, and serial interfaces were added. IP crypto and router pim-sparse
key words were added.
Copyright © 2005 ADTRAN
Enable Mode Command Set
256