Dns-Server Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dns-server <address1> <address2>
Use the dns-server command to specify the DNS server address(es) to assign to a client.
Syntax Description
<address1>
<address2>
Default Values
By default, no DNS server address is defined.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 4.1
Usage Examples
The following example defines two DNS server addresses for this configuration pool:
(config)#crypto ike client configuration pool ConfigPool1
(config-ike-client-pool)#dns-server 172.1.17.1 172.1.17.3
61200990L1-35E
Assigns the first DNS server address.
Optional. Assigns the second DNS server address.
Command was introduced.
Copyright © 2005 ADTRAN
IKE Client Command Set
1064