Dns-Server (Dhcp Pool Command) - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
dns-server <address> <secondary>
Use the dns-server command to specify the default primary and secondary Domain Name System (DNS)
servers to use for the Dynamic Host Configuration Protocol (DHCP) client. Use the no form of this
command to remove the configured DNS server.
Syntax Description
<address>
<secondary>
Default Values
By default, there are no specified default DNS servers.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1
Usage Examples
The following example specifies a default DNS server with address 192.72.3.254 and a secondary DNS
server with address 192.100.4.253:
(config)#ip dhcp-server pool MyPool
(config-dhcp)#dns-server 192.72.3.254 192.100.4.253
61200990L1-35E
Specifies the address (in dotted decimal notation) of the preferred DNS server on
the network (example: 192.72.4.254).
Optional. Specifies the address (in dotted decimal notation) of the second
preferred DNS server on the network (example: 192.100.4.253).
Command was introduced.
Copyright © 2005 ADTRAN
DHCP Pool Command Set
1150