Dial-Backup Randomize-Timers Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Frame Relay Sub-Interface Config Command Set
dial-backup randomize-timers
Use the dial-backup randomize-timers command to randomize the call timers to minimize potential
contention for resources. Use the no form of this command to return to the default value. For more detailed
information on Frame Relay dial-backup functionality, refer to the Functional Notes and Technology
Review sections of the command dial-backup call-mode [answer | answer-always | originate |
originate-answer | originate-answer-always] on page 725.
Syntax Description
No subcommands.
Default Values
By default, the AOS does not randomize the dial-backup call timers.
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 1.1 Command was introduced.
Usage Examples
The following example configures the AOS to randomize the dial-backup timers associated with this
endpoint:
(config)#interface frame-relay 1.16
(config-fr 1.16)#dial-backup randomize-timers
61200990L1-35E Copyright © 2005 ADTRAN 733