Hash Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
hash [md5| sha]
Use the hash command to specify the hash algorithm to be used to authenticate the data transmitted over
the IKE SA.
Syntax Description
md5
sha
Default Values
By default, hash is set to sha.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1
Usage Examples
The following example specifies md5 as the hash algorithm:
(config-ike)#attribute 10
(config-ike-attribute)#hash md5
61200990L1-35E
Choose the MD5 hash algorithm.
Choose the SHA hash algorithm.
Command was introduced.
Copyright © 2005 ADTRAN
IKE Policy Attributes Command Set
1071