Login Authentication - Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
login authentication <aaa login list>
Use the login authentication command to specify the named AAA login list to use for authenticating users
connecting on this line.
Syntax Description
<aaa login list>
Default Values
The default value is the default AAA list.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 5.1
Functional Notes
If the AAA subsystem is activated but no login authentication list is given, the default list is used. If the
default list is used but the default list is not configured, the behavior for telnets is to use the local user
database.
Usage Examples
The following example specifies that myList will be used for authenticating users connecting on this line:
(config)#line telnet 2
(config-telnet2)#login authentication myList
61200990L1-35E
Specifies the AAA login list to use for authentication.
Command was introduced.
Copyright © 2005 ADTRAN
Line (Telnet) Interface Config Command Set
497