Ip Ospf Authentication - Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
ip ospf authentication [message-digest | null]
Use the ip ospf authentication command to authenticate an interface that is performing OSPF
authentication.
Syntax Description
message-digest
null
Default Values
By default, ip ospf authentication is set to null (meaning no authentication is used).
Applicable Platforms
This command applies to the NetVanta 1000R, 3000, 4000, and 5000 Series units.
Command History
Release 3.1
Release 11.1
Usage Examples
The following example specifies that no authentication will be used on the demand interface:
(config)#interface demand 1
(config-demand 1)#ip ospf authentication null
61200990L1-35E
Optional. Selects message-digest authentication type.
Optional. Specifies that no authentication be used.
Command was introduced.
Command expanded to include the demand interface.
Copyright © 2005 ADTRAN
Demand Interface Configuration Command Set
665