Set Ip Dscp Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
set ip dscp [<value> | afxx | csxx | default | ef]
Use the set ip dscp command to set the Differentiated Services Code Point (DSCP) value in the IP header
of the packet. Use the no form of this command to discontinue matching.
Syntax Description
<value>
afxx
csxx
default
ef
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 2000 and 5000 Series, and Total Access 900 Series units.
Command History
Release 11.1
Usage Examples
The following example sets a DSCP value of af11 in the IP header of the route map named MyMap:
(config)#route-map MyMap permit 100
(config-route-map)#set ip dscp af11
61200990L1-35E
Sets the DSCP numeric value. (Valid range: 0 to 63.)
Sets the assured forwarding (AF) value. (Select from: 11, 12, 13, 21, 22,
23, 31, 32, 33, 41, 42, or 43.)
Sets the class selector (CS) value. (Valid range: 1 to 7.)
Sets the default IP DSCP value.
Marks the packet for expedited forwarding (EF).
Command was introduced.
Copyright © 2005 ADTRAN
Route Map Command Set
1188