Undebug All Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide Enable Mode Command Set
undebug all
Use the undebug all command to disable all activated debug messages.
Syntax Description
No subcommands.
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 2.1 Command was introduced.
Usage Examples
The following example disabled all activated debug messages:
>enable
#undebug all
61200990L1-35E Copyright © 2005 ADTRAN 278