Show Running-Config Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show running-config
Use the show running-config command to display a text print of all the non-default parameters contained
in the current running configuration file. Specific portions of the running-config may be displayed, based
on the command entered.
Variations of this command include the following:
show running-config
show running-config access-lists
show running-config access-lists verbose
show running-config checksum
show running-config interface <interface type> <interface id>
show running-config interface <interface type> <interface id> verbose
show running-config ip-crypto
show running-config ip-crypto verbose
show running-config policy-class
show running-config policy-class verbose
show running-config qos-map
show running-config qos-map verbose
show running-config router pim-sparse
show running-config router pim-sparse verbose
show running-config verbose
Syntax Description
access-lists
checksum
interface <interface type> Displays the current running configuration for a particular interface. Type
<interface id>
ip crypto
policy-class
qos-map
router pim-sparse
verbose
Default Values
No default value necessary for this command.
61200990L1-35E
Displays the current running configuration for all configured IP access lists.
Optional. Displays the encrypted Message Digest 5 (MD5) version of the
running configuration.
show running-config interface ? for a list of valid interfaces.
Specifies any valid slot/port interface (e.g., 0/1).
Displays the current running configuration for all IPSec VPN settings.
Displays the current running configuration for all configured policy classes.
Displays the current running configuration for all configured QoS maps.
Optional: Displays the current global PIM-SM configuration.
Optional. Displays the entire running configuration to the terminal screen
(versus only the non-default values).
Copyright © 2005 ADTRAN
Enable Mode Command Set
255