Set Dscp Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
set dscp <0-63>
The set dscp command is an optional command for a QoS map that can be used to modify the DSCP field
(on matching packets) to the specified value.
Syntax Description
<0-63>
Default Values
No default value is necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 6.1
Usage Examples
This command sets the DSCP value (for all matching traffic) to 46:
(config)#qos map VOICEMAP 10
(config-qos-map)#set dscp 46
61200990L1-35E
Specifies the decimal DSCP value.
Command was introduced.
Copyright © 2005 ADTRAN
Quality of Service (QoS) Map Commands
1167