Spanning-Tree Hello-Time Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
spanning-tree hello-time <seconds>
Use the spanning-tree hello-time command to specify the delay interval (in seconds) between hello
bridge protocol data units (BPDUs). To return to the default interval, use the no form of this command.
Syntax Description
<seconds>
Default Values
By default, the delay is set to 2 seconds.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1
Usage Examples
The following example configures a spanning-tree hello-time interval of 10,000 seconds:
(config)#spanning-tree hello-time 10000
61200990L1-35E
Specifies the delay interval (in seconds) between hello BPDUs.
Range: 0 to 1,000,000.
Command was introduced.
Copyright © 2005 ADTRAN
Global Configuration Mode Command Set
461