Show Ip Policy-Sessions Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
show ip policy-sessions <policyname> [all]
Use the show ip policy-sessions command to display a list of current policy class associations. Refer to ip
policy-class <policyname> max-sessions <number>
policies.
Syntax Description
<policyname>
all
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 3.1
Release 11.1
61200990L1-35E
Optional. Displays policy class associations for a specific policy class.
Displays all policy-sessions, including active associations (through which the
firewall is allowed to pass traffic) and associations flagged for deletion (through
which the firewall is forbidden to pass traffic). Associations flagged for deletion will
usually be freed within a few seconds of timeout or deletion, depending on packet
congestion; servicing of packets is given priority. New traffic matching such an
association will create a new active association, provided the traffic still matches a
policy-class allow or NAT entry.
Command was introduced.
The All option was added.
Copyright © 2005 ADTRAN
Enable Mode Command Set
on page 390 for information on configuring access
223