Option Command - ADTRAN 5000 Series Command Reference Manual

Command Reference Guide
option <option value> [ascii | hex | ip] <value>
Use the option command to describe a generic DHCP option to be published to the client. The user may
specify any number of generic options to be published to the client.
Syntax Description
<option value>
ascii
hex
ip
<value>
Default Values
No default value necessary for this command.
Applicable Platforms
This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and
Total Access 900 Series units.
Command History
Release 9.1
Usage Examples
The following example publishes DHCP options to the client:
(config)#ip dhcp pool MyPool
(config-dhcp)#option 100 ascii ascii_value
(config-dhcp)#option 101 hex AB458E80
(config-dhcp)#option 102 ip 192.168.1.1
61200990L1-35E
Specifies the value of the generic DHCP option published to the client.
Range: 0 to 255.
Specifies the DHCP option information in ascii format.
Specifies the DHCP option information in hexidecimal format.
Specifies the DHCP option information in IP format.
Specifies the ASCII, hexidecimal, or IP value. The value for ascii is simple text.
The value for hex is an 8-digit hexidecimal number (32 bit). The value for ip is a
standard IP address in the format A.B.C.D.
Command was introduced.
Copyright © 2005 ADTRAN
DHCP Pool Command Set
1160