Overflow Database External - Allied Telesis AT-x510-28GTX Command Reference Manual

OSPF C
OMMANDS

OVERFLOW DATABASE EXTERNAL

overflow database external
Overview Use this command to configure the size of the external database and the time the
router waits before it tries to exit the overflow state.
Use the no variant of this command to revert to default.
Syntax overflow database external <max-lsas> <recover-time>
no overflow database external
Mode Router Configuration
Usage Use this command to limit the number of AS-external-LSAs a router can receive,
once it is in the wait state. It takes the number of seconds specified as the
<recover-time> to recover from this state.
Example The following example shows setting the maximum number of LSAs to 5 and the
time to recover from overflow state to be 3:
awplus#
awplus(config)#
awplus(config-router)#
C613-50102-01 REV C
Parameter Description
<max-lsas>
<0-2147483647> The maximum number of Link State
Advertisements (LSAs). Note that this value should be the same
on all routers in the AS.
<recover-time>
<0-65535> the number of seconds the router waits before trying
to exit the database overflow state. If this parameter is 0, router
exits the overflow state only after an explicit administrator
command.
configure terminal
router ospf 100
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
overflow database external 50 3
954