Match Metric - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

match metric

Syntax
Release Information
Description
Options
Mode
1276
match metric metricValue [ metricValue ]*
no match metric [ metricValue ]
Command introduced before JunosE Release 7.1.0.
Matches a route for the specified metric value. The no version removes the match clause
from a route map unless you specify a value, in which case only that value is removed
from the match clause.
metricValue—Number in the range 0–4294967295, which indicates the preference
value for a specific route in a route map
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Policy List Configuration, Route Map Configuration
Copyright © 2010, Juniper Networks, Inc.