Media Flow Manager Administrator's Guide
Figure 77
Service Director > Configure Page Detail (Match Response Configuration)
Manage Service Director
Activate, Deactivate, or Remove entirely a configured Matching URL Host chosen from the
drop-down list.
See
Figure
persistent across reboots.
Figure 78
Service Director > Configure Page Detail (Manage Service Director)
Service Director's crossdomain XML Configuration
A crossdomain file is required to be returned to flash players. You can configure the
crossdomain file in one of two ways:
•
Use the following preset XML Response—Select this radio-button and choose a
configured XML response file from the drop-down list.
•
Configure through Domain Names and Domain 1, Domain 2, and Domain 3—Select
this radio-button and enter up to three domain names. The names are automatically
added to the crossdomain.xml file in the system.
•
Restore Factory Default crossdomain.xml—You can also reset your crossdomain file to
its system factory state by selecting this radio-button.
Click Apply to immediately apply changes; click Save at the top of the page to make changes
persistent across reboots.
78, below, for graphic. Click Save at the top of the page to make changes
CHAPTER 3 Media Flow Manager Web-Based Interface
Service Director
85