Environmental Information - ABB IRB 6710 Product Manual

8 Decommissioning

8.2 Environmental information

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Material
Aluminium
Batteries, Lithium
Brass, zink alloys
Cast iron/nodular iron
Circuit boards
Copper
Dysprosium
Lithium
Neodymium
Continues on next page
616
Example application
Wrist house, tilt house, covers, connection box, mo-
tor housing
Serial measurement board
Calibration protection cap and plug and couplings,
connectors and nuts in cable harness
Structural parts (base, frame, lower arm, arm house,
tube shaft, process turning disc)
Serial measurement unit, brake release unit
Cables, motor wiring, pins, sockets
Motor magnets
Battery
Motor magnets
© Copyright 2023 ABB. All rights reserved.
Product manual - IRB 6710
3HAC085695-001 Revision: A