ABB IRB 6710 Product Manual page 301

Removing the cable harness - base, frame and lower arm
These procedures describes how to remove the cable harness from base, frame
and lower arm.
Preparations before removing the cable harness in the base
1
2
3
4
Product manual - IRB 6710
3HAC085695-001 Revision: A
Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
Remove the base cover.
Loosen the connectors:
• R1.MP
• R1.SMB
If used, disconnect the DressPack hoses
in the base.
© Copyright 2023 ABB. All rights reserved.
5.6.1 Removing the cable harness
Note
xx2100000981
xx2100001109
xx1400000366
Continues on next page
5 Repair
Continued
301