ABB IRB 6710 Product Manual page 205

Spare part
Maintenance set, link ear
Required tools and equipment
Equipment
Lock screw, M16x120
Hydraulic press equipment, balan-
cing device
Dismantle and mounting tool
Hydraulic cylinder
Hydraulic pump 80 MPa
Lifting shackle
Lifting accessory (chain)
Standard toolkit
Required service parts
Consumable
Protection plug
Grease
Locking liquid
Locking liquid
Product manual - IRB 6710
3HAC085695-001 Revision: A
5.3.2 Replacing spherical roller bearing, balancing device link ear
Article number
3HAC087168-001
Article number
-
3HAC074411-001
3HAC028920-001
3HAC11731-1
3HAC13086-1
-
3HAC15556-1
-
Article number
3HAC4836-26
3HAA1001-294
-
-
© Copyright 2023 ABB. All rights reserved.
5 Repair
Continued
Note
The maintenance kit contains:
• End cover
• Radial sealing with dust
lip, (2 pcs)
• O-ring
• Spherical roller bearing
• Washer
Note
Used to secure lower arm.
Used to unload or restore a balan-
cing device.
User instructions are enclosed
with the tool.
Used for removing and fitting
shaft and bearings.
User instructions are enclosed
with the tool.
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment.
To be used with the press and
puller tools.
See technical specifications in the
user instructions for the press
equipment.
SA-10-8-NA1
Lifting instruction 3HAC15880-2
enclosed.
Content is defined in section
Standard toolkit on page 628.
Note
Located at the front link ear of the
balancing device.
Replace if damaged.
Tribol GR 100-0 PD
Loctite 2400 (or equivalent Loctite
243)
Loctite 2400 (or equivalent Loctite
243)
Continues on next page
205