ABB IRB 6710 Product Manual page 207

Unloading the balancing device springs and locking position with the Hydraulic press equipment, balancing
device
Use this procedure to unload and lock the balancing device in unloaded position
with the Hydraulic press equipment, balancing device (3HAC074411-001).
1
2
3
Attaching lifting accessory to the balancing device
1
Product manual - IRB 6710
3HAC085695-001 Revision: A
5.3.2 Replacing spherical roller bearing, balancing device link ear
Action
DANGER
Make sure that all supplies for electrical
power, hydraulic pressure, and air pressure
are turned off.
Remove the cover plate on the back of the
balancing device.
DANGER
DO NOT remove any other screws than the
rear cover attachment screws.
Unload the balancing device with the press
equipment, to make the piston rod and front
ear adjustable when pulling the shaft out.
xx0900000813
Go to the user instructions enclosed with
the press tool.
DANGER
Handling the tool incorrectly will cause
serious injury.
Read and follow enclosed user instructions
for the tool.
Action
CAUTION
The weight of the balancing device (exclud-
ing cradle) is 140 kg
All lifting accessories used must be sized
accordingly.
© Copyright 2023 ABB. All rights reserved.
Note
xx2200001330
Hydraulic press equipment, balancing
device: 3HAC074411-001
User instructions are enclosed with the
tool.
Note
Continues on next page
5 Repair
Continued
207