ABB IRB 6710 Product Manual page 202

5 Repair
5.3.1 Replacing the balancing device
Continued
2
3
4
Continues on next page
202
Action
Foundry Plus:
Apply Mercasol in the hole for the locking
screw.
Restore the balancing device according to
instructions for the press equipment.
xx0900000813
Go to the user instructions enclosed with
the press tool.
DANGER
Handling the tool incorrectly will cause
serious injury.
Read and follow enclosed user instructions
for the tool.
Apply flange sealant and refit the cover
plate on the back of the balancing device.
© Copyright 2023 ABB. All rights reserved.
Note
xx1400000372
User instructions are enclosed with the
tool.
Hex socket head cap screw: M10x25 8.8-
A3F.
Tightening torque: 50 Nm.
Flange sealant for conical fittings: Loctite
5400 (or equivalent Loctite 577).
xx2200001330
Product manual - IRB 6710
3HAC085695-001 Revision: A