ABB IRB 6710 Product Manual page 117

If there is a risk of debris falling into the gear when opening the oil plug for
inspection, it is instead recommended to use the vent hole for oil level inspection:
xx2200002147
Required tools and equipment
Equipment
Standard toolkit
Required consumables and wear parts
Wear part
Lubricating oil
O-ring, G 1/2"
Required documents
Document name
Technical reference manual - Lubrication in gearboxes
Product manual - IRB 6710
3HAC085695-001 Revision: A
4.3.7 Inspecting the oil level in axis-1 gearbox
Article number
-
Article number
-
3HAC061327-059
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
Note
Content is defined in section
toolkit on page 628.
Note
See Type of lubrication in gearboxes
on page 136.
Used on oil plug. Always replace when
refitting oil plug.
Document number
3HAC042927-001
Continues on next page
Continued
Standard
117