ABB IRB 6710 Product Manual page 600

6 Calibration
6.4.3 Installation locations for the calibration tools
Continued
Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new.
Spare part
Protection cover and plug set
600
Article number
3HAC064875-001
(axes 1, 2, 3 and 4)
3HAC059487-001
(axes 5 and 6)
© Copyright 2023 ABB. All rights reserved.
Note
Contains replacement calibration
pin covers and protective plugs
for the bushings.
Product manual - IRB 6710
3HAC085695-001 Revision: A