Changing The Oil In Axis-2 Gearbox - ABB IRB 6710 Product Manual

4 Maintenance

4.4.3 Changing the oil in axis-2 gearbox

4.4.3 Changing the oil in axis-2 gearbox
Location of the gearbox and oil plugs
The gearbox and its oil plugs are located as shown in the figure.
xx2200001760
A
B
C
Required tools and equipment
Equipment
Oil collecting vessel
Oil dispenser
Standard toolkit
Required consumables and wear parts
Wear part
Lubricating oil
O-ring, G 1/2"
Continues on next page
144
Oil plug with nipple for draining and filling with an oil dispenser
Oil plug hole for inspection
Oil plug hole for ventilation
Article number
-
-
-
Article number
-
3HAC061327-059
© Copyright 2023 ABB. All rights reserved.
Note
The capacity of the vessel must
be sufficient to take the complete
amount of oil.
One example of oil dispenser can
be found in section Type of lubric-
ation in gearboxes on page
Content is defined in section
Standard toolkit on page
Note
See Type of lubrication in gearboxes
on page 136.
Used on oil plug. Always replace when
refitting oil plug.
Product manual - IRB 6710
3HAC085695-001 Revision: A
136.
628.