ABB IRB 6710 Product Manual page 544

5 Repair
5.8.3 Replacing the axis-3 gearbox
Continued
4
5
6
Preparations before refitting the upper arm
1
2
Continues on next page
544
Action
Slide the gearbox into position and fit the
attachment screws and washers.
Remove the guide pins and fit the remain-
ing attachment screws and washers.
Tighten the attachment screws.
Action
Wipe clean all contact surfaces.
Fit two guide pins in opposite M12 holes
in the axis-3 gearbox.
Tip
Lubricate the guide pins with some grease
to make the upper arm slide better.
© Copyright 2023 ABB. All rights reserved.
Note
Hex socket head cap screw : M10x40 12.9
Gleitmo 603+Geomet 500 (27 pcs ).
xx2100002449
xx2100002446
Tightening torque: standard torque 70 Nm
(Tightening torque for lubricated screws
(Molykote, Gleitmo or equivalent) with allen
head screws on page 626).
Note
Guide pin, M12x150: 3HAC13056-2
Always use guide pins in pairs.
xx2100002445
Product manual - IRB 6710
3HAC085695-001 Revision: A