ABB IRB 6710 Product Manual page 476

5 Repair
5.8.2 Replacing the axis-2 gearbox
Continued
Location of the gearbox
The gearbox is located as shown in the figure.
xx2200001390
Summary of the replacement procedure
This is a brief summary of the replacement procedure, containing the major actions
to be performed.
Required spare parts
Continues on next page
476
1 Remove the balancing device link ear shaft.
2 Drain the axis-2 gearbox.
3 Loosen the cabling brackets inside the lower arm and on the frame.
4 Remove the upper and lower arm mounted together, as an assembly.
5 Remove the axis-2 motor.
6 Replace the axis-2 gearbox.
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 6710 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2023 ABB. All rights reserved.
Product manual - IRB 6710
3HAC085695-001 Revision: A