ABB IRB 6710 Product Manual page 500

5 Repair
5.8.2 Replacing the axis-2 gearbox
Continued
2
3
4
Continues on next page
500
Action
Fit two guide pins in opposite holes.
Tip
Use different lengths on the guide pins to
simplify guidance.
Tip
Lubricate the guide pins with some grease
to make the gearbox slide better.
Lift the gearbox and let it rest on the guide
pins.
CAUTION
Use stoppers on the guide pins.
Remove the lifting accessory.
DANGER
There is a risk that the gearbox may glide
out and fall down if it is too far out to on the
guide pins and no stoppers are used.
© Copyright 2023 ABB. All rights reserved.
Note
Guide pin, M12x150 / Guide pin, M12x200:
3HAC13056-2 / 3HAC13056-3
Always use guide pins in pairs.
xx2000000466
xx2100002414
Product manual - IRB 6710
3HAC085695-001 Revision: A