Systat/Systatcl Register - Analog Devices ADSP-TS101 TigerSHARC Hardware Reference Manual

SYSTAT/SYSTATCL Register

The register is a read-only register that indicates the system/bus
SYSTAT
status. The
SYSTAT
ing to address 0x6 or
determines the value of the error bits after the read. The bit descriptions
for this register are shown in Figure 2-8 on page 2-32 and Figure 2-9 on
page 2-33.
•
SYSTAT
•
SYSTATCL
ADSP-TS101 TigerSHARC Processor
Hardware Reference
register can be read using the name
corresponding to address 0x7. The address
SYSTATCL
– no change in register contents
– error Bits19–16 are cleared after the read
Memory and Register Map
SYSTAT
correspond-
2-31