Table of Contents
Advertisement
JTAG Issues
JTAG Issues
The Analog Devices family of emulators are tools which aid developers
when testing and debugging a hardware and software system. Analog
Devices has supplied an IEEE 1149.1 compliant Joint Test Action Group
(JTAG) Test Access Port (TAP) on each JTAG TigerSHARC processor.
The emulator uses the TAP to access the internals of the TigerSHARC
processor, allowing the developer to load code, set breakpoints, observe
variables, observe memory, examine registers, and so on.
For details on designing the JTAG scan path on your target system, refer
to ADSP-TS101 TigerSHARC Embedded Processor Data Sheet and Analog
Devices Engineer-to-Engineer Note EE-68 Analog Devices JTAG Emula-
tion Technical Reference (2.4), available on the Analog Devices Internet
site: http://www.analog.com.
Resources and References
This section identifies sources for additional information about designing
and testing applications using the TigerSHARC processor.
Decoupling Capacitors and Ground Plane
Recommendations
For information on using decoupling capacitors, refer to the ADSP-TS101
TigerSHARC Embedded Processor Data Sheet.
10-38
ADSP-TS101 TigerSHARC Processor
Hardware Reference
Advertisement
Table of Contents
