Avaya S8700 Maintenance Manual page 593

status conference
Page 4 - Endpoint Capability Information
This section only describes the fields that are specific to the endpoint-level
command output.
The following screen shows page 4 of 6: status conference x endpoint y.
status conference endpoint
--------------------------------------------------------------------------------
VID | vfmt: QCIF
| da_sfg
-----|--------------------------------------------------------------------------
MISC | derestrict
-----|--------------------------------------------------------------------------
XR | 64 64x2 64x3 64x4 64x5 64x6
| 128 192
-----|--------------------------------------------------------------------------
AUD | ntrl 711m 711a g728 g722_64
-----|--------------------------------------------------------------------------
LSD | var 300 1200 4800 6400 8000 9600 14.4k 16k 24k 32k 40k 48k 56k 62.4k 64k
-----|--------------------------------------------------------------------------
HSD | var 64k 128k 192k 256k 320k 348k 512k
-----|--------------------------------------------------------------------------
MLP | var 4k 6.4k 14.4k 16k
-----|--------------------------------------------------------------------------
HMLP | var 62.4k
--------------------------------------------------------------------------------
Endpoint Capability Information. Fields on this page will only be displayed if an
endpoint declares the specific capability. For example, if an endpoint does not
declare the VID H.CTX capability, the H.CTX field will not be displayed.
Provides information about the type of video and frame rate the endpoint supports.
VID
vfmt - does not display if the endpoint has no video capability. Every value is blank
if there is an active call or if this is an audio-only endpoint. Otherwise, values for this
field include:
FCIF
QCIF
larger screens, CIF displays sharper resolution video, which ZCIF is blocked, but
may run at higher frame rates and less clear. The differences are less
observable on very small displays.
cfps
endpoint can receive video for CIF and QCIF operating modes. CIF frame-rate
values are 30 fps, 15 fps, 10 fps, and 7.4 fps. If the endpoint does not support
CIF (that is, the vfmt field is QCIF), the
da_sfg
H.CTX
SG4_sfg
555-233-143
ENDPOINT CAPABILITY INFORMATION
cfps: 30 H.CTX
qfps: 7.5 H.CTX+
S/M mbe dcomp cic
384
256 320 512 768 1152
g722_48
22.4k 24k 30.4k 32k
68k 128k 192k 256k 320k
for full CIF
for quarter CIF. Support of CIF implies support of QCIF. In general, for
and are the maximum frame rate (frames/second) at which the
qfps
indicates support for H.261 Still Frame Graphics transfers.
, and are proprietary video format capabilities.
H.CTX+ SG4
indicates support for SG4 Still Frame Graphics
SG4 imp
SG4_sfg
384x2 384x3 384x4
1472 1536 1920
768k 1152k 1536k
38.4k 40k 46.4k
384k
cfps value should be blank.
Issue 1 May 2002
page 4 of 6
384x5
62.4k
7-337