Avaya S8700 Maintenance Manual page 559

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

status bri-port

Connectivity

Select Switch

For PNs connectivity status refers to the availability of the EAL (Expansion

Archangel Link) and INL (Indirect Neighbor Link) to the carrier for both

active and standby PNCs (if duplicated). Possible values are:

up — EAL and INL are both available.

down — EAL and INL are both unavailable.

near-end — The EAL is available, and the INL is unavailable.

far-end —The INL is available, and the EAL is unavailable.

blank — In the standby column, this means PNC is not duplicated.

For SNs connectivity status indicates circuit pack insertion on the Switch

Node as follows:

up — At least one switch node interface circuit pack in the Switch Node

is inserted.

down — There are no switch node interface circuit packs inserted on

the Switch Node.

blank — In the active column, this indicates that the Switch Node

carrier is currently the standby in a critical-reliability system. In the

standby column, this indicates that the Switch Node carrier is currently

active (whether or not PNC is duplicated).

The location of the circuit pack containing the emergency transfer select

switch (PN maintenance).

The current setting of the emergency transfer switch:

on Emergency transfer has been manually activated.

off Emergency transfer is being manually prevented.

auto+ The cabinet is controlling emergency transfer and it is currently

auto- The cabinet is controlling emergency transfer it is not currently

unavail The current setting of the emergency transfer switch is not

Each Port Network and Switch Node located in the cabinet is identified by

its PN number or its SN number and PNC designation (A or B).

The number of major, minor and warning alarms currently logged against

the Port Network or Switch Node.

Issue 1 May 2002

Troubleshooting