Monitor System - Avaya S8700 Maintenance Manual

Maintenance Commands

monitor system

This command with the view1 or view2 option displays one screen page of output
summarizing the overall condition of the system. With the connection option, the
command displays the real-time status for time slots and buses. Additionally,
there are other miscellaneous parameters displayed that show call rates,
intervals, etc.
Synopsis
monitor system [ view1 | view2 | conn [ pnn pnn-number-1 pnn-number 2
pnn-number-3 ] ]
Examples
monitor system view1
monitor system view2
monitor system conn
monitor system conn pnn 1 5 7
Permissions
The following default logins may execute this command: system technician,
inads, cust, init, nms, browse.
Description
The monitor system view1 and view2 commands display a page of output
summarizing the condition of the system. This on-line status report is
automatically updated until the command is canceled by pressing the
Two display options are available: view1 and view2.
The current overall system status is available with either of the view options.
"View1" displays attendant, maintenance, and traffic status. Attendant and
maintenance status are updated every minute and traffic status is updated
on an hourly basis. When the command is canceled, the technician will be
automatically logged off for security reasons.
"View2" contains everything the "view1" report does, except that the hunt
group measurements are omitted from the traffic status portion of the
"view2" report.
7-222 Issue 1 May 2002
key.
CANCEL
555-233-143