Save Translation - Avaya S8700 Maintenance Manual

save translation

save translation
save translation
This command backs up translations of the database to the server. It either
completes or fails.
NOTE:
The save command can take up to 5 minutes to complete. Avoid pressing
the
ENTER
the result messages to be lost.
All translation data is kept in volatile system memory during normal operation. In
the event of a power outage or certain system failures, data in memory is lost.
The save translation command allows the user to store on disk the translation
data currently in memory. This operation can be executed as part of scheduled
background maintenance or on demand.
The save translation cannot be executed if translation data is being changed by
an administration command.
Output
The following display shows a typical result of entering save translation .
save translation
Command Completion Status
Success
Command successfully completed
Command:
Field Descriptions.
Command Completion
Status
Error Code
555-233-143
key on the keyboard during this time, since doing so will cause
SAVE TRANSLATION
One of the following results is displayed:
Success
Failure
Code that indicates the type of error in the case of an abort or
failure.
Error Code
0
Issue 1 May 2002 7-269