Status Access-Endpoint - Avaya S8700 Maintenance Manual

Maintenance Commands

status access-endpoint

status access-endpoint extension [print]
This command displays the operational of a non-signaling port on a DS1 interface
or on an analog tie trunk circuit pack.
Output
The following display shows a typical result when status access-endpoint 2300
is entered.
status access-endpoint 2300
Field Descriptions
The extension number of the specified port.
Extension
The physical location (cabinet-carrier-slot-circuit) of the port.
Port
The type of communication supported by the channel: 56k-data, 64k-data, or
Communication
voice-band-data.
Type
The operational status of the access-endpoint channel: in-service/idle,
Service State
out-of-service, maintenance-busy or disconnected.
The location of any facility/endpoint to which this access-endpoint is
Connected
connected.
Ports
7-290 Issue 1 May 2002
ACCESS ENDPOINT STATUS
Extension:
Port:
Communication Type:
Service State:
Connected Ports:
2300
02B0905
56k-data
disconnected
555-233-143