Avaya S8700 Maintenance Manual page 603

status hardware-group
Field Descriptions
Hardware Group
Command State:
Number of MOs
Tested:
Total Number of
MOs to be
Tested:
Percent
Complete:
Elapsed Test
Time:
Repetition
Number
Percentage of
Tests Passed:
Percentage of
Tests Failed:
Percentage of
Tests Aborted:
Command:
Test sequence:
Test
repetition:
Output
options:
Hardware
options:
555-233-143
The state of a hardware-group command: active: testing is in progress;
canceled: testing has been canceled; complete the command has
completed and there is no testing going on.
The number of MOs in the specified group (refer to test hardware-group
command) that have had been tested by the current hardware-group
command. This includes every MO that either was actually tested or was
aborted due to resource contention.
The total number of MOs in the group that was specified in the "test
hardware-group" command.
A ratio of the number of MOs completed and the total number of MOs to
test in the command.
The duration of the hardware-group test. If a test was canceled and then
restarted this time excludes the cancel period. If the hardware-group
command has finished it will indicate the length of time it took to complete
the command. The time is displayed in the HH:MM:SS format where HH is
hours, MM is minutes, and SS is seconds.
The number of iterations that have been completed corresponding to the
'repeat' or the 'continuously' option.
The percentage of tests that passed.
The percentage of tests that failed.
The percentage of tests that were aborted.
The hardware-group action object and qualifiers that were entered.
This will display either short or long.
This will display either continuously or the keyword repeat along with the
repeat value entered.
This will display the selections that were chosen on the input form:
auto-page, background, or failures.
This will display the selections that were chosen on the input form
(all-ports).
Issue 1 May 2002 7-347