Set Options - Avaya S8700 Maintenance Manual

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

Maintenance Commands

set options

This command allows the user to administer whether certain alarms are reported

to INADS or whether they are downgraded to a minor alarm, warning alarm, or no

The following default logins may execute this command: inads, init .

This special command enables the technician (that is, remote user with INADS

permission) to select which types of maintenance categories report alarms

automatically and which types require the customer to call in. Judicious use of

this command can reduce the number of ineffective alarms to the TSC. For the

set options command to be effective, the default settings specified in this section

should always be used. These settings are not intended to be changed on a

per-system basis. Special circumstances (for example, special studies) may

require temporary changes under the guidance of Tiers 3 and 4.

Alarms cannot be upgraded.

Initially, the alarm reporting options for On-board Trunk Alarms (Alarm Group 1),

both major and minor, are set to "yes" (y); all others are set to "warning" (w).

Every trunk group is associated with alarm severity group 1 by default.

Issue 1 May 2002