Refresh Route-Table - Avaya S8700 Maintenance Manual

refresh route-table

refresh route-table
Occasionally the tables used to route IP messages become corrupted and/or
contain stale routes, delaying packet delivery. This command removes every
dynamic (learned) route from the TN799 (C-LAN) circuit pack's route tables and
replaces any of the stale (administered) routes that have become corrupted.
Table 7-39. refresh route-table command parameters
Action/Object Qualifier
refresh all
route-table
location
NOTE:
This command is call-preserving, meaning that the switch does not drop any
calls already in service.
Instructions
1. At the switch terminal, type refresh route-table and one of the following
qualifiers
2. Press
555-233-143
Qualifier Description
Refreshes every C-LAN
circuit pack in a switch
Refreshes the route tables
in a specific C-LAN circuit
pack (CCcss)
all (Screen 7-18)
location (CCcss) See examples in the Board Location field in
Screen 7-19.
.
E
NTER
Permissions Defaults
init
inads
craft
station and
trunk MSP
permissions
Issue 1 May 2002
Feature
Interactions
7-245