Avaya S8700 Maintenance Manual page 590

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance Commands
AUDIO
Other possible AUDIO mode values include
and
(cont'd.)
and are not supported by MCU.
56/64
The
either 64, 128, 192, 256, 320, 384, 512, 768, 1472, 1536, or 1920 kbps. It is
restrict
or 672 kbps.
Note that if the conference is configured for N x 56-kbps operation, the
endpoint may signal either via capabilities or modes that is operating at the
proper rate. In such a case, even when we receive
which does not match the conference communication mode of
the capability indicates
displayed on Page 4) the
compatibility between the conference and the endpoint.
VIDEO
The Video mode:
(proprietary), or
indicated;
MLP
Multi Layer Protocol data mode. When
any-mlp
affect video status.
The
none
H_MLP
The High Speed MLP mode. The HMLP mode should be
values in this mode will affect video status.
LSD
Low Speed Data mode. The LSD mode should be
this mode will affect video status.
HSD
High Speed Data mode. The HSD mode should be
in this mode will affect video status.
CRYPT
Encryption mode. The CRYPT mode should be
values in this mode will affect video status.
S/M
Single-/multi-channel interoperability mode.
sender is interoperating multiple channels and a single channel (for example,
6B and H0).
interoperating between 6B and H0. Normally this value is
Not-comp-6B-H0
7-334
Issue 1 May 2002
(no audio signal) which never match conference mode
Au-off, Frm
56/64
field is
derestrict
when operating at rates of either 56, 112, 168, 224, 280, 336, 448,
restrict
STAT 56/64
(recommended),
H.261
SG4
(proprietary) indicate that video is on in the direction
video-off
when the video is off.
or
ww-pcs
, the MLP mode should be
mode should be
MLP
MLP-off
. Again, other values in this mode will affect video status.
Not-comp-6B-H0
. Other values in this mode will affect video status.
neutral
(neutralized I-channel)
when operating at per-channel rates of
derestrict
(
capability has
MISC
restrict
is set to
y
to indicate 56/64
(proprietary),
H.CTX
is administered as
Data Mode
var-MLP
. Other values will
when Data Mode is administered as
H-MLP-off
LSD-off
HSD-off
encrypt-off
6B-H0-comp
indicates that the
indicates that the sender is not
command
restrict
, if
+
H.CTX
. Other
. Other values in
. Other values
. Other
555-233-143

Advertisement

Table of Contents
loading

Table of Contents