Avaya S8700 Maintenance Manual page 564

Maintenance Commands
Parameters
status conference
status conference 2 print
Feature Interactions
None.
Output
Depending on the command entered, it is possible to have many records display.
Active conferences display first (in order of conference-ID), followed by completed
conferences (most recently completed first). There is no data or information about
conferences not yet begun.
The data for each conference displays in 2 parts: the first screen describes the
status of the conference and indicates the modes and levels of the conference. It
also shows certain endpoint information such as which endpoints are in use and
which endpoint caused the conference operating mode to change. This screen is
similar to the administration screens. The remainder of the screens display
endpoint level data (up to 8 endpoints per screen), displaying the ports and drop
reasons.
The screen below shows page 1 of a typical administration screen. The first
screen appears when status conference is entered and at least 1 valid
conference is found.
7-308 Issue 1 May 2002
Displays all stored conference data.
Displays data on conference 2 (current or last completed), and
sends it to the SAT printer.
555-233-143