Status Hardware-Group - Avaya S8700 Maintenance Manual

Maintenance Commands

status hardware-group

status hardware-group [print]
Summary information about the active or last hardware group tests will be
displayed. This display includes the number and percentage of maintenance
objects tested, the percentage of tests passed/failed/aborted, the time elapsed
since initiating the hardware group test, the specific hardware group test
command (see test hardware-group command) initiated, and the state
(active/canceled/complete) of the hardware-group test.
Output
The following display shows a typical result when status hardware-group is
entered.
status hardware-group
Test sequence:
Test repetition:
Output Options:
Hardware Options:
7-346 Issue 1 May 2002
HARDWARE GROUP STATUS
Hardware Group Command State:
Number of MOs Tested:
Total Number of MOs to be Tested:
Percent Complete:
Elapsed Test Time (hr:min:sec):
Repetition Number:
Percentage of Tests Passed:
Percentage of Tests Failed:
Percentage of Tests Aborted:
ENTERED HARDWARE GROUP Command
Command: test hardware-group system
short
repeat 3
failures
all-ports
page 1 of 1
active
11070
12300
90%
4:15:30
1
82%
11%
7%
555-233-143