Avaya S8700 Maintenance Manual page 578

Maintenance Commands
Does it have the required audio capability? –
Aud
Does it have the required video capability and is receiving video? –
Vid
blank
The state of the Control Link to the ESM (T.120 stack terminator), the endpoint
Mlp
MLP data capability, and the state of the data connection in the T.120 stack.
This field value is always
conference is none, and therefore, the data does not apply, or the endpoint
has never joined the conference.
Does it have the Still Frame Graphics capability? –
Gx
7-322 Issue 1 May 2002
– The endpoint has the required audio capability. Audio add-on
y
endpoint always have the Aud field set to y once the endpoint has joined
the conference.
– This endpoint is PCM only, and it changed the video quality of the
c
conference by changing the operating audio from G.728 to G.711. If the
administered audio mode is auto and the administered bandwidth is 112
kbps (56 k/channel) or 128 kbps (64 k/channel), the system starts out with
the highest common audio of G.728. When the administered bandwidth is
greater than 128 kbps, the system starts out with the highest common
bandwidth of 7 kHz.
– A PCM-only endpoint that did not have the capability of supporting the
e
administered audio mode of G.728 (such as a data conference)
G – 278/G.711 endpoint that did not have the capability of supporting the
administered audio mode of 7 kHz. Such endpoints operate with PCM
audio and interwork with the current operating audio mode.
– The field is blank until the first call is made from/to the endpoint.
blank
y – The endpoint has the required video capability and should be
receiving video if the Chl, Aud, and Dat fields are
c – It downgraded the conference's video quality - either from CIF to ACIF
or by decreasing the frame rate. The conference video mode is set by
default to CIF and if a QCIF-only endpoint joins the conference, then the
entire conference is made to operate in QCIF, with the video clarity
downgraded. Also, the conference frame rate is initially set to the highest
frame rate that can then be reduced by any endpoint. If the conference
video mode is not administered with upgrade capability, then if the video
parameters for a conference have been "downgraded," they are not
"upgraded" until every endpoint disconnects from the conference.
– The endpoint has not declared any video capability in its cap-set.
e
n – Audio only, not receiving video, possibly due to an audio or data
problem.
blank – Audio add-on endpoint always have the Vid field set to blank.
blank
y – This endpoint has this capability.
e – This endpoint did not declare this capability. The conference retains
the still frame graphics capability when a non-compliant endpoint joins the
conference.
blank – This endpoint has never joined the conference.
y , c , e , blank
.
y
, indicating that the Data Mode for the
, ,
y e blank
y , c , e , n ,
555-233-143