Maintenance Commands
reset maintenance
reset maintenance UUC
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command performs a reset on a specified maintenance circuit pack.
Specifying cabinets 1 through 44 resets the EPN's Maintenance circuit pack in the
'a' carrier of the specified cabinet, dropping any local login to that circuit pack.
Output
The following screen shows results from reset maintenance on an S8700
Multi-Connect system.
reset maintenance
Port
01A
Command successfully completed
7-262
Issue 1 May 2002
Maintenance Name Alt. Name Test No. Result
MAINT
TEST RESULTS
306
PASS
Error Code
555-233-143