Set Ipserver-Interface - Avaya S8700 Maintenance Manual

set ipserver-interface

set ipserver-interface
set ipserver-interface Uc
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command sets an IPSI to be active for a given cabinet carrier.
Parameters
U cabinet (1-44)
c carrier (a, b, d, e)
Examples
set ipserver-interface 3a
Output
set ipserver-interface 3a
Port Maintenance Name
PN 03 IPSV-CTL
Command successfully completed
555-233-143
Specify the cabinet number with the IPSI board
you want to test.
Supply the carrier you want to test.
TEST RESULTS
Alt. Name Test No. Result
3A 1501 PASS
Error Code
Issue 1 May 2002 7-273