Avaya S8700 Maintenance Manual page 577

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

status conference
Is the endpoint currently participating in the conference or in process of
In Use
connecting to the conference? –
EnhancedBasic Service Flag –
Enh BAS
y
n
Data on the quantify and quality of channels (transfer rate)? –
Chl
555-233-143
y
– The endpoint is in use and is fully connected on all media in an active
conference.
– The endpoint is in use and is fully connected, however the endpoint
c
has changed the conference audio or video capability or has changed the
rate of the conference because of rate adaptation. This condition requires
analysis of this endpoint's capabilities and mode fields to identify which
capability was reduced.
– The endpoint is in use but the endpoint had capability problems. The
e
endpoint does not have one of the required capabilities (Vid, Bhl, MLP) to
be a full participant. For MLP capabilities, see the "T120" field. This
condition requires analysis of this endpoint's capabilities and mode field to
identify the missing capability.
– The endpoint is in use but is not connected to all media. This
f
indicates that the endpoint has declared every required capability
(channel/video/audio/data) but is not fully connected to all conference
media at this time. This endpoint may be in the process of connecting,
has failed to connect, or is not a valid video source. This condition
requires analysis of this endpoint's capabilities and mode fields to identify
the problem.
– The endpoint was connected in a conference but has/was
n
disconnected or attempted to connect to a conference but was
unsuccessful.
– The field is blank until the first call is made from/to the endpoint.
blank
– The endpoint supports the enhanced BAS commands/caps;
– The endpoint only supports the basic BAS commands/caps.
y
– The endpoint has the required number of channels.
e
– The endpoint has not declared support for the correct number of
channels and cannot participate fully in the conference.
n
– The endpoint has declared the correct number of channels, but every
channel has not yet joined the conference, due to either a network or
endpoint problem.
blank
– Audio add-on endpoints always have the Chl field set to
.
blank
y
,
c
,
e
,
f
,
n
,
blank
.
n
,
y
Issue 1 May 2002
y
,
e
,
n
,
blank
7-321

Advertisement

Table of Contents
loading

Table of Contents