Set Time - Avaya S8700 Maintenance Manual

set time

set time
set time
This command brings up a form showing the current day, date, month, year and
time kept by the system clock. These entries can be edited to update the system
time. The second field is set to zero whenever the time on the clock is altered. If
no new entries are made, system time remains unchanged.
Input Form
set time
WARNING: Changing the date or time will impact BCMS, CDR and MEASUREMENTS
NOTE:
When the system clock is upgraded from an earlier release, the daylight
savings time rule on the set time screen defaults to 0 (no rule). While you
can change the daylight savings time rule, the system clock is not adjusted
automatically until the next transition of the rule.
555-233-143
DATE AND TIME
DATE
Day of the Week: Sunday
Day of the Month: 24
TIME
Hour: 8 Minute: 16
Daylight Savings Time Rule: 0
Month: October
Year: 1999
Second: 31 Type: Standard
Issue 1 May 2002
Page 1 of 1
7-287