List Pms-Down - Avaya S8700 Maintenance Manual

For multi-connect configurations
Hide thumbs Also See for S8700:
Table of Contents

Advertisement

Maintenance Commands

list pms-down

list pms-down [start-time] [stop-time] [print]
This command lists every event that has meaning to the Property Management
System (PMS) that have occurred while the link between the switch and the PMS
was down. For example, any room status codes entered by hotel housekeeping
staff during a time of PMS outage would be shown in this report.
Parameters
The starting time in 24-hour notation from which events are to be listed.
start-time
The time in 24-hour notation up to which events are to be listed.
stop-time
Output
The following example shows a typical result when list pms-down is entered.
list pms-down
Extension
402
405
411
411
450
Field Descriptions
The extension associated with the reported event.
Extension
The PMS event that was reported to the switch, but which could not be sent to the
Event
PMS.
The reason that the event could not be reported by the switch to the PMS.
Reason
The time at which the event was reported.
Time
7-204
Issue 1 May 2002
PROPERTY MANAGEMENT SYSTEM ACTIVITY
Event
from room, code 1
PMS link out of service
from stn, code 1
check in, complete
PBX enabled MWL
from room, code 1
Reason
PMS link out of service
PMS link out of service
PMS link out of service
PMS reject
Time
7:00am
9:00am
9:30am
12:00am
12:05am
555-233-143

Advertisement

Table of Contents
loading

Table of Contents