Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
Qos: disable
Trust: dscp
class-map
Use the class-map Global Configuration mode command to create or modify
a class map and enters the Class-map Configuration mode. Use the no form
of this command todelete a class map.
Syntax
class-map-name [match-all | match-any]
class-map
class-map-name
no class-map
Parameters
c
•
lass-map-name—Specifies the class map name.
match-all—Performs a logical AND of all the matching statements under
•
this class map. All match criteria in this class map must be matched.
•
match-any—Performs a logical OR of all the matching statements under
this class map. One or more match criteria in this class map must be
matched.
Default Configuration
If neither match-all nor match-any is specified, the match-all parameter is
selected by default.
Command Mode
Global Configuration mode
User Guidelines
The class-map Global Configuration mode command specifies the name of
the class map for which class-map match criteria are to be created or modified
and enters class-map configuration mode. In this mode, up to two match
commands can be entered to configure the match criteria for this class. When
using two match commands, each has to point to a different type of ACL
(one IP and one MAC). The classification is by first match, therefore, the
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
CLI\files\QoS.fm
Quality of Service (QoS) Commands
725
Advertisement
Table of Contents
