Table of Contents
Advertisement
class-map
Use the class-map command in Global Configuration mode to define a new
DiffServ class of type match-all. To delete the existing class, use the no form
of this command.
Syntax
class-map match-all class-map-name [{ipv4 | ipv6}]
no class-map class-map-name
•
class-map-name — a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying an existing DiffServ class.
Default Configuration
The class-map defaults to IPv4.
Command Mode
Global Configuration mode
User Guidelines
The match-all parameter indicates that all of the match criteria configured in
the class map must be met for the packet to be processed by the class map.
Example
The following example creates a class-map named "DELL" which requires all
ACE's to be matched.
console(config)#class-map DELL
console(config-cmap)#exit
class-map rename
Use the class-map rename command in Global Configuration mode to
change the name of a DiffServ class.
Syntax
class-map rename classname newclassname
Layer 2 Switching Commands
663
Advertisement
Table of Contents
