Avaya DEFINITY Server CSI Maintenance Manual page 547

test ds1-loop
Feature Interactions
Loopback or span tests are not allowed on DS1 boards unless the board
has been busied out.
Only one of the CPE Loopback Jack, far-end CSU, one-way span, or
DS1/CSU loopback tests may be active at any given time on a DS1 span.
Output
The following example shows the output for the test ds1-loop 1c07 command,
and assumes that the board in cabinet 1, carrier c, slot 7 is a TN767E DS1 board.
The responses appear on a test-by-test basis with one line of data for each test
result.
test ds1-loop 01C07 ds1/csu-loopback-tests
Port Maintenance Name
01C07 DS1-BD
01C07 DS1-BD
01C07 DS1-BD
Field descriptions
Port
Maintenance
Name
Alt. Name
Test No
Result
Error Code
555-233-119
TEST RESULTS
Alt. Name Test No. Result
Port address (cabinet-carrier-slot-circuit)
The name of maintenance object
The alternate means of identifying the maintenance object.
The test being executed
Test result: Pass, Abort, Fail, No Board, Disabled, or Extra Bd
Numeric code explaining why the release failed or aborted. See
the detailed list of the codes by test number for each MO.
1209 PASS
1210 PASS
1211 PASS
Issue 5 October 2002
Error Code
547